Welding Flux Dryer
Welding flux dryer
Brand: ETS-ANHOA
Best choice for drying welding flux.
Powder painted mild steel cover.
Stainles steel drying chamber.
Pre-eminent in keeping temperate due to quality rock wool.
Equipped with:
- Heating bar, long life.
- Digital display temperate controller.
- Time switch
The advantage of ETS - ANHOA Flux Dryer:
1. Modul design:
The main working parts (Heating box, control box, main body) is modul designed, very easy to be installed or uninstalled and therefore YOU can do repairing, maintenance and replacing by your self following a very simple technical guide.
Minimized the transport cost to send replaced parts if inquired, Minimized the reparing time.
2. Small flux loading door: Easy for loading welding flux.
3. Time switch: Daily programable, can be automatic started, stopped drying at any inquiry time.
Main Specifications:
| Model | DR.200-3.5 | DR200-4.0 | DR300 - 3.5 | DR400 – 4.0 |
| Input voltage | 1 phase 220V AC (50-60HZ) | 3 phases 380V | ||
| Power (kw) | 3.5 | 5.0 | 8.5 | 12.0 |
| Max capacity (kg) | 100 | 200 | 300 | 500 |
| Max temp. (°C) | 50 - 400 | 50 - 400 | 50 - 350 | 50 - 400 |
| Adjust step (°C) | 1 | 1 | 1 | 1 |
| Drying Chamber (mm) | 500x500xH500 | 500x500xH700 | 500x500xH900 | 500x500x1.100 |
| Weight (kg) | ~ 95 | ~ 115 | ~ 135 | ~ 225 |